SIZES

STANDARD:
22" UP  ( that is floor to shoulder
Weight range tends to be  50 lbs-Plus

MINI/MEDIUM:This Term is VERY Deceptive,
In fact I Just hate even using it with the Doodle Breeds
God Willing this will help you be a informed shopper

The "Ideal" size for a Mini/Medium is
UNDER  22 inches. at top of shoulder>>35-50lbs
A MINI DOODLE IS Typically NOT THE SIZE OF A MINI POODLE

Do NOT be deceived!!!!

We do NOT Artificial inseminate ,nor do we infuse
Spaniels or terriers into the mix to  try to reduce size!!!
Some Info on the web is very confusing concerning Sizes
NO breeder can honestly guarantee you size
These are afterall hybrids,
If you have size restrictions where you live I would Not Recommend
a Labradoodle or Goldendoodle ,
you could consider a Aussiedoodle Weight range Vary.
(weight is not a good judge,btw Height would be floor to top of shoulder)
Doodle  Sizes & Differences in Doodles
F1 Labradoodles=This is Lab to poodle cross, this is first generation, resulting in healthier offspring! Hair type can be smooth like a lab,wirey look like a Irish wolfhound or Wavy/shaggy, they can shed or no,,I do not recommend this cross for people with severe allergies.

F1B Labradoodles or Goldendoodles=This is Labradoodle/Goldendoodle Bred back to Poodle coats range from Borderline Wavy Curly shaggy look doodle very consistent in coat types F1B Labradoodles are the MOST likely of any to be non shedding and Allergy friendly then ANY doodles and is the easiest coat to take care of. Please be aware that F1B GOLDENDOODLES produce a very Curly coat requiring alot of care,
F1b Labradoodles are a generally produce a  softer more managable coat

F1 Goldendoodle's=This is Golden Ret, bred to Poodle,,I have found the Goldendoodle's are also very consistent in the coat and Very likly to be non shedding and allergy friendly,,this produces a wavy curly shaggy look puppy,Normally are Very Low to No shed ,and typically allergy friendly. (I do NOT breed F!B Goldendoodles,This mix does produce alot of coat,They resemble a poodle type coat!!)

F3 or F2 ,Depending on who you talk to)Labradoodle =F1B Labradoodle to F1 Labradoodle or Poodle This cross should keep the hybrid vigor and obtain a more consistency in coat type ,,This is as far as we go with our backcrossing, (also we don't infuse other breeds of dogs such as spaniel and terriers in the mix as other breeders are doing,,this only introduces more health issues in the mix and contributes to unhealthy dogs.
mini goldendoodles
www.Doodlesville.net
mini goldendoodles
BERT & ERNIE LAMA
(Labradoodle)--(Goldendoodle)
mini labradoodles
mini labradoodles
I have to say I am also very confused!!!
Who came up with this size structure in Doodles anyway?
I have been doing this for over 5yrs and I still have no idea!!!,
Lets look at this>>>
Labs and Golden's come in one size only!!
***********
Poodle's and Australian Shepherds on the other hand
come in 3 size's

I have Never seen a Toy or Mini Labrador or Golden Retriever
LOOKING FOR A
MINI Labradoodle or Goldendoodle??,,
Consider a AUSSIEDOODLE
Aussiedoodle pups
CLICK HERE
petite goldendoodles
miniature goldendoodles
Miniature labradoodles,mini labradoodle,
Mini Goldendoodle,Minature goldendoodles,
Mini aussiedoodle,Miniature aussiedoodles,goldendoodle,goldendoodles,
labradoodles,
labradoodle,labradoodle breeder,
Toy labradoodles,
toy goldendoodles,labradoodle sizes,
goldendoodle sizes,aussiedoodles,
Miniature labradoodles,mini labradoodle,Mini Goldendoodle,Minature goldendoodles,Mini aussiedoodle,Miniature aussiedoodles,Toy labradoodles
mini labradoodle information
SIZE Australian Shepherd (size chart)

STANDARD:
Preferred height for both male and female is
18 inches up to 23 inches at the top of the withers.

MINIATURE:
Preferred height for both male and female is
14 inches up to 18 inches at the top of withers.

TOY:
Preferred height for both male and female is
10 inches up to 14 inches at the top of the withers.

SIZE Poodle (size chart)
Poodles are the Original Water Retriever

STANDARD:
Preferred height for both male and female is over 15 inches at the highest point of the shoulder.
Oldest of the three breeds of Poodle,
The Standard is the original Poodle;
which the Miniature and Toy were developed.

MINIATURE:
Preferred height for both male and female is
15 inches or under, with a minimum of 10 inches at the highest point of the shoulder.
Miniatures were breed down from the Standard Poodle.

TOY:
Preferred height for both male and female is 10 inches or under at the highest point of the shoulders
Doodleville Doodle's

STANDARD:
22" -24"at the top of the withers.
55-65lbs

MEDIUM:
15"-22"at the top of the withers.
35-50lbs

MINI
10-14""at the top of the withers.
20-35lbs

TOY: (Litter panned summer 2008)
13"/14 inches at the top of the withers.
15-20lbs
These are appx size
I make NO gurantees
Labradoodle Puppies | Goldendoodle Breeder | Aussiedoodle Puppies | Labradoodle Breeder
SIZES WE Breed...
Labradoodles and Goldendoodles >>We  Breed Mini/Mediums to Standard

We do NOT breed F1B or Higher Generation Goldendoodles
this produces entirely to much of a poodle like coat  most folks cannot deal with ,
We DO raise Mini/Medium & Standard
F1B & Higher Generation Labradoodles
Mini/Mediums under 18"at shoulder  appx 35-50lbs (depending on parents)
Standards over 22" at the shoulder 45-70lbs on avg
WE DO NOT ARTIFICAL INSEMINATE
Nor do we Infuse Spaniels or Terriers to obtain size!!!

The VERY Smallest we raise is MINI AUSSIEDOODLES (see Aussiedoodle page)
I have MINI Aussie's (yes you can purchase MINI & even Toy Australian Shepherds,,
I have yet to see a MINI or Toy, Lab or Lab or Golden retriever   :O)
The coats of the Aussiedooldes look just like the Goldendoodles,
Softer ,almost like Bunny Fur,, they also come in Various Colors!!!

(Currently the Majority of our Female breeding dogs are under 22"
(Which is Technically considered Mini's) Moms normally determine size of a pup

Some breeders are trying to Tell people that they can guarantee size on a Doodle ,,
This My friends This is Impossible!!!,these are after all HYBRIDS,
Do NOT expect to get a smaller Labradoodle or Goldendoodle on first Cross
A larger gene can crop in there anytime.even in the same litter!!!
Some breeders are giving a false hope to people by Artificial Inseminating,
Toy/Miniature Poodles to their Standard Size Retrievers.Just to sell you a puppy
The Health Issues that can stem from this breeding practice are Numerous
Resulting in Longer backs, Shorter legs, and most importantly
negative growth issues,We Do NOT do that here!!!
We feel that using Artificial Insemination in our opinion, is bad breeding practices

FYI, Mom's Normally determine Size

If god meant it to happen it will happen naturally,
if it doesn't we wont take shortcuts to achieve it!!

Some Breeders can be very deceptive in telling you that they breed ,"true minis"  or "comfort doodles" with the hybrids there is no such thing,  The German Bred poodles in a breeding program is working well for allot of us,, these are 14-19" typically ,,
they Do produce the smaller size in their offspring,
I have been very lucky in using this method to achieve my minis without jeopardizing
the health or Look  of the breed to accomplish it.
Now some breeders are using Cockers and Terriers  infused in the breed
to get a smaller size,,Ok I'm shaking my head here,,LOL
IMO These are one of the worse breeds to consider as a family dog.
I have formed this opinion from several years as a Groomer & Vet Tech.,
most spaniels and terriers have very nasty temperaments
and are not suitable for service therapy or even family dogs
since they are so unpredictable.
Not to mention the health issues to name a couple,
Major skin and persistent ear problems,along with cancers all of which runs
in most AKC Breeds, why? because they have Inbred and Linebred so long!!!
Toy Aussiedoodle